Popcorn ceilings were popular in the ’50s – ’80s, and now more and more homeowners are scraping them down and adding their own knockdown ceiling texture or doing a flat design.
In all of our renovation homes the first thing to come down is the popcorn. And, actually, it’s a really satisfying project to DIY.
Scraping popcorn off your ceiling is like that feeling you get when you are scraping wallpaper and you know when you get that big chunk to come off at one time, and it is the happiest moment of your demoing life? Well that is what scraping popcorn texture off your ceiling is like the entire time! ha!
I’m not kidding. I actually really enjoy it. But…it is extremely messy! So if you’re going to do it in a house you’re living in, it might not be as much fun and you’ll want to make sure to take the time and do the prep work.
- 12″ + Putty Knife
- Garden Sprayer
- Drop Cloths
- Ladder or Stilts
- Trash Bags
- Broom, dust pan, shop vac
- A hat or hoodie
Prep Work, Cover Floors & Poly Walls
First, you want to cover your floors so that they don’t get ruined. If you’re under a complete renovation like us you may not need to cover your entire floors and walls. This will make clean up easier if you do the prep work so determining the state of the rest of the home will help you decide how much you want to do.
When under construction, the guys had a big drop cloth that they moved around with them as they scraped so that they didn’t have to go back and try sweep up wet plaster. When you’re scraping, the popcorn that comes down is really wet.
If you have a drop cloth, it’ll be a lot easier to clean up than just leaving it all over the floor. If you leave the popcorn on the floor it’ll either dry and harden to the floor, or it’ll be so wet you can’t sweep it up. If you have a drop cloth you can just wait until it’s full and then go out to the dumpster and whip it off in there.
But when we were doing our living room, Jamie carried around a 5 gallon bucket as he scraped and then I was quickly following behind him and sweeping as he went.
Next with your garden sprayer, fill it up with warm water. Then pump and start spraying the ceiling and let it sit for about 30 seconds before you start scraping. You can also just use a spray bottle but using a garden sprayer is so much nicer and you won’t get those hand cramps! Becuase you’ll be spraying a lot of water.
When scraping ceilings, it’s nice to have at least two people. So one person can spray water and clean up as the other ways just scrapes away.
We used sheetrock mudding knifes for our scrapers. They say to let the water soak in for more than a few minutes before you scrape…but if you know me…I don’t have much patience, we sprayed and scraped quickly. There are lots of recipes out there for the perfect mixture to make the popcorn texture come off easily, but warm water does the trick just fine for us.
If you have painted ceilings, it might take a couple of coats of water and some extra muscle to scrape it off. It’s not fun once they’ve had multiple paint jobs done to them, but if they aren’t painted, like ours, it’ll come off pretty slick.
Weirdly, it’s actually really therapeutic to scrape popcorn off ceilings when it does come off nice.
You’ll also want to be careful not to scrape too hard or dig into the ceiling. Just let the scraper do the work. Otherwise you’ll have gouges in your ceiling and you might be re-taping and mudding. Especially if you are doing flat ceilings, this is a big deal! You need to scrape your ceilings off perfectly clean so you can get that flat look.
If you want to take it a step further with the cleanup and are doing the scraping where you have nice floors, you can scrape and hold up a bucket while you scrape and it’ll fall right in. That can be hard if you’re balancing on a ladder but you can also set up some boards across ladders to walk on, or Jamie has even used stilts.
Let Ceilings Dry
Once you’re done scraping all of the ceilings, make sure to let them thoroughly dry before you skim coat or paint them.